Exceeding Standards in Quality & Dedication
Abaco’s steel products are manufactured on site in accordance with the highest standards of the material handling industry. Utilizing quality materials, Abaco completes each project with dedication and the utmost attention to detail. During fabrication, all components pass through a three-stage phosphatized cleaning process and are then painted with a polyester powder coating for a long-lasting, durable finish.
In addition to our wide selection of standard sizes, we offer specialty sizes. The standard color for our products is gray however, other colors are available. Additional items available such as dividers, bin fronts, front bases, label holders, splices and angle sways.
|
COMPONENTS
|
|
Shelves
|
Standard Sizes
|
| 20 gauge is standard |
12” x 36” |
12” x 42” |
12” x 48” |
|
|
| Cold-rolled steel |
15” x 36” |
15” x 42” |
15” x 48” |
|
|
| Triple bent on all four sides |
18” x 36” |
18” x 42” |
18” x 48” |
|
|
| 18 gauge available on request |
24” x 36” |
24” x 42” |
24” x 48” |
30” x 36” |
30”x 42” |
| |
30” x 36" |
36” x 42” |
36” x 48” |
Custom sizes available on request |
|
|
Uprights
|
Standard Sizes
|
| 12 Gauge |
6’-3” |
7’-3” |
8’-3” |
9’-3” |
|
| Hot-rolled rail steel |
10’-3” |
12’-3” |
14’-3” |
|
|
| 1 ¼” x 1 ¼” |
Custom heights available on request |
| Holes punched 1” on center |
Custom sizes available on request |
|
|
Reinforcing Bars
|
Standard Sizes
|
|
|
|
Cross Braces
|
Standard Sizes
|
| 13 Gauge |
12" |
15” |
18” |
24” |
36” |
| |
42” |
48” |
|
|
|
| 1” x 1” Strip, Radius Edge |
|
| 1” x 1” Strip, Radius Edge |
|
|
|
Back & Side Panels
|
Standard Sizes
|
| 24 gauge |
12” |
15” |
18" |
24" |
Side Pannels |
| Cold-rolled steel |
36”
|
42" |
48" |
|
Back panels |
| 3/8” Holes on 1” Centers |
All Back and Side panels are 51” high |
|
|
|
|
|
|
Hardware
|
| ¼” x 5/8” Roundhead bolts with square nuts |
|
| ¼” x 1” Roundhead bolts with square nuts |
|
|
|
Bases and Bin Fronts
|
| 24 gauge cold rolled steel |
| Bases are 2” x shelf length formed to fit between shelf and floor |
| Bin fronts (to keep material from falling from front of shelf) come in standard heights of 2”, 4” and 6” x shelf length |
|
|
Dividers
|
| 24 gauge cold rolled steel |
| Front and rear edges hemmed for safety |
| Top and bottom are flanged and punched to attach to shelves with nuts and bolts or plastic push pins. |
|
